Cross Carline Technologies

Intelligent technologies that support the driver in safe and convenient driving

Intelligent Drive groups together all active and passive safety components into a well thought-out system – for the safety of the vehicle occupants and other road users. The integral safety concept brings the vision of accident-free driving another step closer.

Click below to learn more about how Mercedes-Benz vehicles keep you and your loved ones safe.

Adaptive Highbeam Assist – enhanced safety in the darkThe system makes driving in the dark safer and helps to reduce the strain on the driver. When the high beam is switched on, Adaptive Highbeam Assist always makes the best possible headlamp range available while avoiding dazzling oncoming traffic. The driver barely needs to make use of the high beam switch and is able to concentrate better on driving. Adaptive Highbeam Assist uses continuous input from a camera to automatically vary the range of the high-beam headlamps based on the distance to oncoming vehicles and any vehicles traveling ahead of you.

Blind Spot Assist warns of vehicles in the blind spot area. The radar sensors of Blind Spot Assist monitor the obscured areas to the sides and behind the vehicle. As soon as another road user is detected in the blind spot, a red triangle lights up in the relevant exterior mirror. If the driver fails to notice this warning and engages the turn indicator, the red warning triangle starts to flash and an additional audible warning is sounded. Blind Spot Assist is active at speeds from 20 – 155 mph. At speeds below 20 mph, a yellow triangle shows that the system is inactive. Blind Spot Assist can be switched on and off via the instrument cluster.Active Blind Spot Assist will go a step further if the driver does not respond to warnings, the system can intervene actively and help prevent a collision by precisely applying the brakes. An active steering movement, braking input, or acceleration deactivates the intervention of the Active Blind Spot Assist System.

Features of Blind Spot Assist:
Two short-range radar sensors with transmitting and receiving units – each of these sensors monitors a 3.5 meter wide area to the left and right of the vehicle which begins behind the driver in the B-pillar area and extends back 3 meters beyond the rear of the vehicle

*Blind Spot Assist is only attended as an aid to the driver. It may not detect every vehicle and it is no substitute for due attentiveness on the part of the driver.

ATTENTION ASSIST® continuously analyzes driving behavior and steering movements. If the system detects certain steering patterns that frequently accompany drowsiness, it warns the driver visually in the instrument cluster at the same time as emitting audible signals.ATTENTION ASSIST® can be activated and deactivated in the main menu of the instrument cluster under Assistance Systems. When switched on, it is active at speeds between 50 and 112 mph.

ATTENTION ASSIST® primarily processes the following items of information:

  • Time – as read from the instrument cluster
  • Driver Time – as determined by the ESP control unit
  • Steering Movements – as measured by the steering angle sensor
  • Vehicle Speed – as measured by the ESP control unit
  • Vehicle’s longitudinal/lateral acceleration and yaw speed – as determined by specific sensors
  • Driver’s operating actions – the operating actions registered by the system include use of the control buttons for the radio, steering column adjustment actions, actions on the instrument cluster, on the cruise control, and on the multifunction steering wheel

The system analyzes 72 parameters in total

Generation 2.0 additional features:

  • Now active at a wider speed range from 37 – 124 mph
  • The system’s sensitivity can also be adjusted, for example drivers who already feel tired when they get behind the wheel
  • New information page in the instrument cluster display shows the driver’s current attention level, system status and driving time since last break

BAS® PLUS is capable of more than just helping the driver to avoid collisions with vehicles ahead or lessen their consequences in a purely longitudinal direction: the new Cross-Traffic Assist function can also come to the driver’s aid when there is a risk of a collision with cross traffic at junctions.The system can provide the required braking pressure up to full braking, should the driver apply the brakes too lightly. BAS® PLUS can develop additional brake pressure to suit the situation in order, ideally, to prevent a collision.

If a collision can no longer be prevented, the impact speed is reduced as far as possible by emergency braking.

Specifics:

  • A system comprising long, medium, and short-range radar monitors the area in front of the vehicle together with the stereo camera.
  • When the system detects the danger of a collision with cross-traffic, a visual warning is issued in the cluster instrument. An alarm signal sounds at the same time in order to draw the driver’s attention to this danger and requests that the brakes be applied.
  • Crossing traffic are registered up to a speed of 45 mph

There are various generations of COLLISION PREVENTION ASSIST, but please note we do not call this out in our customer facing nomenclature. Please click on the corresponding generation for further system details.In general COLLISION PREVENTION ASSIST goes unnoticed as long as there is no threat of danger from the immediate driving situation. The system continually monitors the driving situation and if the system identifies the threat of a rear-end collision, visual and acoustic warnings alert the driver.

COLLISION PREVENTION ASSIST is integrated in a mid-range radar system which also serves as the control unit. The information for the displays and for braking intervention is supplied via the communications interfaces to the ESP® and to the instrument cluster.

COLLISION PREVENTION ASSIST PLUS (3.0)
The system continually monitors the driving situation at speeds of 5 to 155 mph. If the system identifies the threat of a rear-end collision, visual and acoustic warnings alert the driver. As soon as the brake is depressed, the Adaptive Brake Assist system integrated into COLLISION PREVENTION ASSIST PLUS can boost the brake pressure if the driver does not apply sufficient brake force to prevent the accident. The system ensures that the available braking distance is used to maximum effect. In addition the system can also provide Autonomous Braking.

  • Distance/Collision Warning •5 – 155 mph (moving or slowing vehicle detected)
  • 5 – 45 mph (standing vehicle detected)
  • Adaptive Braking Assist •5 – 155 mph (moving or slowing vehicle detected)
  • 5 – 50 mph (standing vehicle detected)
  • Autonomous Braking •5 – 65 mph (moving or slowing vehicle detected)
  • 5 – 31 mph (standing vehicle detected)

DISTRONIC PLUS®, the adaptive cruise control system, helps the driver to keep the vehicle at the required distance to a vehicle ahead within the speed range of 0 to 124 mph (200 km/h).The new steering assistance system can now help drivers stay centered in their lane by generating the appropriate steering torque when traveling on a straight road and even in gentle bends.

Should the driver not have both hands on the steering wheel, the system first issues a visual warning after 10 seconds and after another 5 seconds will deactivate while issuing an acoustic warning (Screen shots from Instrument Cluster)

Specifics
Uses the information from an innovative stereo camera with three-dimensional vision in combination with radar sensors fitted all around the vehicle

DISTRONIC PLUS® with Steering Assist
Steering Assist is the optimum addition to DISTRONIC PLUS® proximity control, a system which helps with maintaining the desired distance from another vehicle in front.Active Blind Spot Assist
This system indicates in the exterior mirror when cars or motorcycles are located in the blind spot and takes evasive action automatically in the event of danger, e.g. during lane changing.Adaptive Highbeam Assist
Adaptive Highbeam Assist adjusts the headlamp range to the prevailing traffic situation and provides for the best possible illumination without dazzling other motorists.LED High Performance Headlamps
Together with their distinctive appearance, LED High Performance headlamps provide a broad spread of light, with a color temperature close to that of daylight, and consume only a low level of energy.Braking Systems:

  • ESP
  • BAS® PLUS
  • PRESAFE® Brake

Night View Assist® Plus with Pedestrian Detection
People and animals can often be hazards on the roads at night. Night View Assist® Plus can recognize them at a range of up to 160m ahead of the vehicle.

4MATIC
4MATIC permanent all-wheel drive provides for added dynamism, comfort and safety on normal roads, too.

BAS® PLUS with Cross-Traffic Assist
BAS® PLUS with Cross-Traffic Assist can help you not only to avoid rear-end collision, buy also collision with crossing traffic at junctions.

PARKTRONIC INCLUDING PARKING GUIDANCE
PARKTRONIC including Parking Guidance indicates parking spaces as the vehicle passes by and makes parking easier by displaying the necessary steering wheel movements for ideal parking.

Active Lane Keeping Assist
Active Lane Keep Assist is able to give you a wake-up call and protect you from the serious consequences of a collision.

Eco Start/Stop Function
In the interests of reduced fuel consumption and emissions, the ECO start/stop function shuts down the engine even when the vehicle is only briefly stationary and duly starts the engine up again when the journey is continued.